Septic System
Septic System
Septic systems treat and disperse relatively small volumes of wastewater from people and a small number of homes and commercial buildings. Septic system regulation is usually a state and local responsibility. The EPA provides information to homeowners and helps to state and local governments to improve the management of septic systems to prevent failures that could harm human health and water quality.
How does it work?
A typical septic system has four main components: a pipe from the home, a septic tank, a drain-field, and the soil. Microbes in the soil digest and remove most contaminants from wastewater before it eventually reaches groundwater. The septic tank is a buried, watertight container typically made of concrete, fiberglass, or polyethylene. It holds the wastewater long enough to allow solids to settle out (forming sludge), and oil and grease to float to the surface (as scum).
It also allows partial decomposition of the solid materials. Compartments and a T-shaped outlet in the septic tank prevent the sludge and scum from leaving the tank and traveling into the drain field area. Screens are also recommended to keep solids from entering the drain field. The wastewater exits the septic tank and discharges into the drain-field for further treatment by the soil. Micro-organisms in the soil give last treatment by removing harmful bacteria, viruses, and nutrients.
ADVANCE HOME
Your septic system is your responsibility!
Did you know that, as a homeowner, you’re responsible for maintaining your septic system? Did you know that maintaining your septic system protects your investment in your home? Did you know that you should periodically inspect your system and pump out your septic tank? If properly designed, constructed and maintained, your septic system can give long-term, effective treatment of household wastewater. If your septic system isn’t maintained, you might need to replace it, costing you thousands of dollars. A malfunctioning system can contaminate groundwater that might be a source of drinking water. And if you sell your home, your septic system must be in good working order.ADVANCE HOME
Information for Homeowners
If your septic tank failed, or you know someone whose did, you are not alone. As a homeowner, you are responsible for maintaining your septic system. Proper septic system maintenance will help keep your system from failing and will help keep up your investment in your home. Failing septic systems can contaminate the ground water that you and your neighbors drink and can pollute nearby rivers, lakes and coastal waters.
Ten simple steps you can take to keep your septic system working properly:
- Locate your septic tank and drain field. Keep a drawing of these locations in your records.
- Has your septic system inspected at least every three years? Hire an inspector trained in septic inspections.
- Pump your septic tank as needed (generally, every three to five years).
- Don’t dispose of household hazardous waste in sinks or toilets.
- Keep other household items, such as dental floss, feminine hygiene products, condoms, diapers, and cat litter out of your system.
- Use water efficiently.
- Plant only grass over and near your septic. Roots from nearby trees or shrubs might clog and damage the system. Also, do not apply manure or fertilizers over the drain field.
- Keep vehicles and livestock off your system. The weight can damage the pipes and tank, and your system may not drain properly under the compacted soil.
- Keep gutters and basement sump pumps from draining into or near your septic tank.
- Check with your local health department before using additives. Commercial septic tank additives do not cut the need for periodic pumping and can be harmful to your system.
Pump often…
You should have your septic system inspected at least every three years by a professional, and have your tank pumped as necessary (generally every three to five years).
Use water efficiently…
The average indoor water use in the typical single-family home is almost 70 gallons per person per day. Dripping faucets can waste about 2,000 gallons of water each year. Leaky toilets can waste as much as 200 gallons each day. The more water a household conserves, the less water enters the system.
Flush responsibly…
Dental floss, feminine hygiene products, condoms, diapers, cotton swabs, cigarette butts, coffee grounds, cat litter, paper towels, and other kitchen and bathroom waste can clog and potentially damage system components. Flushing household chemicals, gasoline, oil, pesticides, antifreeze, and paint can stress or destroy the biological treatment taking place in the system, as well as contaminate surface waters and groundwater.
How do I keep up my septic system?
Plant only grass over and near your septic system. Roots from nearby trees or shrubs might clog and damage the drain field.
Don’t drive or park vehicles on any part of your septic system. Doing so can compact the soil in your drain field or damage the pipes, the tank or other system components.
Keep roof drains, basement sump pump drains, and other rainwater and surface water drainage systems away from the drain field. Flooding the drain field with excessive water slows down or stops treatment processes and can cause plumbing fixtures to back up.
Why should I keep up my septic system?
A key reason to keep up your septic system is to save money! Failing septic systems are expensive to repair or replace, and poor maintenance is often the culprit. Having your system inspected (at least every three years) is a bargain when you consider the cost of replacing the entire system. Your system will need pumping every three to five years, depending on how many people live in the house and the size of the system. An unusable septic system or one in disrepair will lower your property’s value and could pose a legal liability.
Other good reasons for safe treatment of sewage include preventing the spread of infection and disease and protecting water resources. Typical pollutants in household wastewater are nitrogen phosphorus, and disease-causing bacteria and viruses. Nitrogen and phosphorus are aquatic plant nutrients that can cause unsightly algae blooms. Pathogens can cause communicable diseases through direct or indirect body contact, or ingestion of contaminated water or shellfish. If a system is working properly, it will effectively remove most of these pollutants.